heavensentfilms.com has filmed 2 new babies using multiple lenses and a lot of production equipment with the Canon T2i DSLR. First off, these experiences filming babies other than my daughter has been very exciting and brought back those memories of my daughter growing up. Since heavensent films usually only films babies up to 1 year old I know that it’s more of a creative workflow than anything else to achieve a creative final movie. Both sets of parents have been the best to work with and really allowed me to use all of my techniques in filming their beautiful baby. The filming usually only took about an hour or so and if needed we would schedule another day with a possible location change. As you will see in one of the videos I was even allowed to film during a much needed nap time. I of course know how to be quiet around a napping baby but a few times I came close to being noticed by the napping one. In the end I enjoyed filming and creating these videos because it helped me step out of my comfort zone of just filming my daughter growing up.
Now onto my production equipment. For both films I used my collection of DIY video equipment which worked flawlessly for the most part. My DIY slider from Igus.com worked but has a tendency to vibrate the camera if I am sliding at an angle or off center from the rails. On my slider I use a “flexible friction power arm” as seen here http://cheesycam.com/flexible-friction-power-arms-for-dslr-accessories/ This arm is amazing on a slider. It allows me to shoot upside down, as high as the arm can extend, as low as the arm can fold, or at different angles. It’s a really strong arm to use and holds the T2i just fine at any angle. The problem comes up with the slider not allowing me to use as many angles as I want with the arm and camera. With the Igus slider you really have to center your camera on the sliding platform in order for it to be a smooth slide across the entire rail system. I now know the limitations but I do know that I can film at creative angles if I slide slowly and by putting an even amount of pressure from my hand I can get some amazing shots. Now for the glidecam hd 4000 and filming babies. I enjoyed this the most out of all my production equipment. The only thing I need to do is practice practice practice because I am nowhere near perfect filming with this yet. I know the shots I want but somehow I don’t think I have everything balanced perfectly yet to get those shots exactly the way I want them. I have tried more weights and less weights while extending the center post of the glidecam but still get some wobble in the image while I am filming. The technique using the left hand to barely stabilze and turn the glidecam could be where I am having issues but I don’t know for sure. I really just need this balanced perfectly first and then work on my technique. It’s just going to take time and practice.
The FD lenses I used during these shoots were the Canon FL 55mm 1.2 (my favorite), Canon FD 100mm – 200mm, and the Canon kit lens 18 – 55mm on the glidecam. There are many other lenses which I will be using on my next baby films now that I have an FD to EOS adapter with a diopter for helping get these lenses to infinite focus. I had been using a standard metal adapter without a glass element but I couldn’t achieve infinite focus with any of the FD lenses. Now with this new adapter all of my FD lenses work like they should and look amazing when filming with them. Here is a link to check it out http://cheesycam.com/the-cheaper-road-to-a-lens-with-f1-2/ The cheesycam website is a definite go to place for all of your production needs and questions you might have. He answers everything from DiY video equipment projects to actual products on the market for DSLRs.
Here are the 2 baby videos heavensent films has done and thanks for watching